Advances in the adsorptive particulate flotation process

The removal of contaminants from liquid effluents by the adsorptive particulate flotation (APF) process, including new adsorbents and flotation devices, are reported. Herein, contaminants are adsorbed (and/or absorbed) onto the surface of a particulate carrier and both are separated attached to risi...

Descripció completa

Guardat en:
Dades bibliogràfiques
Autor principal: Feris, LA (author)
Altres autors: Santander, M (author), Rubio, J (author), Tejedor De León, Alexis (author)
Format: article
Idioma:anglès
Publicat: 2018
Matèries:
Accés en línia:https://www.sciencedirect.com/science/article/abs/pii/S0301751603001741
http://ridda2.utp.ac.pa/handle/123456789/4457
Etiquetes: Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
Descripció
Sumari:The removal of contaminants from liquid effluents by the adsorptive particulate flotation (APF) process, including new adsorbents and flotation devices, are reported. Herein, contaminants are adsorbed (and/or absorbed) onto the surface of a particulate carrier and both are separated attached to rising bubbles. The adsorbents were coal, charcoal, coal beneficiation tailings, modified Brazilian smectites and barite. Emulsified oils in water, dyes and metal ions present in synthetic and industrial effluents were successfully removed using various carrier and DAF, induced air flotation, IAF or jet flotation for the separation of the loaded carrier. Process efficiency was found to be a function of the carrier/contaminant mass ratio, size distribution of the carrier and system hydrodynamics. Results and mechanisms involved are discussed in terms of adsorption and flotation phenomena.